TWIN/TWIN FLOOR BUNK BED
1
ASSEMBLY INSTRUCTIONS
DN11721
2
SAFETY WARNING
!!
1. This bed is designed for use only mattress (es) meeting the following specifications on the upper
bunk, and lower bunk:
Down bed
Bed type
Twin Standard
Length
74"-75"
With
38 1/2"
Thickness
8" max
Up bed (Bunk bed and tribed included)
Bed type
Twin Standard
Length
74"-75"
With
38 1/2"
Thickness
6" max
2. Replacement parts, including additional guardrails, maybe obtained from any of our
FREIGHTMAN EC CO.,LTD.
3. Follow the information on the warnings appearing on the upper bunk bed end structure and on
the carton. Do not remove warning label from bed.
4. Always use the recommended size mattresses or mattress supports, or both, to help prevent the
likelihood of entrapment or falls.
5. Surface of mattress must be at least 5" (127mm) below the upper edge of guardrails.
6. Do not allow children under 6 years of age to use the upper bunk.
7. Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
8. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
9. Always use the ladder for entering and leaving the upper bunk.
10. Do not use substitute part. Contact the manufacture or dealer for replacement part.
11. Use of a night light may provide added safety precaution for a child using the upper bunk.
12. Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed next
to the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
13. The use of water or sleep flotation mattresses is prohibited.
14. STRANGULATION HAZARD - Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed; for example, but not limited to, hook, belts and jump ropes.
15. Keep these instruction for future reference.
Detail View
3
Part List
A
Horizontal bar HB/FB - 8pcs
B
Leg (Left Front /Right Back)- 2pcs
C
Leg (Left Back/Right Front)- 2pcs
D E
Long guard rail (Back) - 2pcs
F
Short guard rail (Front) - 2pcs
G
Vertical guard rail - 2pcs
H
Upper side rail (Back)- 1pc
J
Upper side rail (Front)- 1pc
M
Right side ladder - 1pc
N
Left side ladder - 1pc Step ladder - 2pcs
O
Slats - 2sets (14pcs/set)
4
K
Lower side rail (Back)- 1pc
L
Lower side rail (Front)- 1pc
Hardware List
1
Wood dowel (6pcs)
3
Hex-Head bolts (22pcs)
4
Hex-Head bolts (16pcs)
5
Hex-Head bolts (4pcs)
6
Hex-Head bolts (6pcs)
7
Horizontal-Hole bolts(42pcs)
1/4"*15 (9.5mm)
8
Wood screws (24pcs)
9
ASSEMBLY TOOLS REQUIRED ( NOT INCLUDED )
5
Hex-Head bolts (6pcs)
2
Allen key (1pc)
(1/4")4.5*58mm
7
7
Note:Part 7 will face up with the "x" mark on it,
otherwise it cannot be tightened
STEP 1:
16PCS
4 7
16PCS
4
7
7
7
STEP 2:
22PCS 22PCS6PCS 6PCS
6
1 3 6 7
3
3
3
3
3
3
3
3
3
3
6
6
6
6
6
6
3
7
7
7
1
1
3
3
3
3
2
2
2
4PCS
5 7
4PCS
5
STEP 3:
7
8
8
8
8
6PCS
8
STEP 4:
8
8
2
2
2
9
24PCS
STEP 5:
9
8
Note: Do not lock the screws of the bed slats to the outermost edge of the bed slats, you
need to leave a certain space at the edges, otherwise it will cause the board to break.
Do not lock the bed slats on the edge of the wood, please hold firmly before screwing ,
66,5mm
