Epilog Soware Suite Instructions
The Epilog Soware Suite consists of the Job Manager & Dashboard. The Soware Suite is a poweul
new tool that will quickly become one of your favorite features on your laser system. From one piece of
soware, you can access any job you have sent to the laser, view the settings you used on any past job,
re-run projects, access your material database, and much more.
• Windows 7/8/10 is required to use the Epilog Soware Suite
Uninstalling the Previous Job Manager
If you have installed a previous version of the Job Manager on your computer, you must uninstall it first
before you continue.
1. Go to Control Panel > Programs and Features and click on Epilog Job Manager
2. Click “Uninstall” and confirm if asked again.
SECTION 3: SOF T WARE INSTALLATION
- 25 -
3. Select “Remove all components” and then click “Next”.
4. Click “Uninstall”.
5. Click Finish to complete the uninstallation of the previous Job Manager.
- 26 -
SECTION 3: SOFTWARE INSTALLATION
How to Install the Epilog Soware Suite
1. Go to epiloglaser.com/drivers and select the Epilog Fusion Edge. Then click on the Epilog Soware
Suite to download the installation file.
2. The installation file will download as a .zip folder that will need to be extracted. Right click the
folder and click “Extract All”. Once finished, double click on the EpilogSuite file.
Note: Make sure that the “Ghostscript” folder included in the download is always in the same
location as your Epilog Suite installation file, or the installation will not be able to complete.
- 27 -
SECTION 3: SOFTWARE INSTALLATION
3. A welcome screen appears, click Next.
4. Select a directory location for the installation file and click Next.
- 28 -
SECTION 3: SOFTWARE INSTALLATION
5. Read and accept the license agreements and click Next.
6. Click Next to use the default start menu, or choose a start menu name of your choice.
- 29 -
SECTION 3: SOFTWARE INSTALLATION
7. Click Install to begin the installation.
8. The Epilog Soware Suite will begin installing, during the installation a dialog box will pop up to
also install the AGPL Ghostscript Package, click Next.
- 30 -
SECTION 3: SOFTWARE INSTALLATION
9. Read and accept the AGPL Ghostscript License Agreement, then click Next.
10. Click Finish to complete the AGPL Ghostscript installation and resume the Epilog Soware Suite
installation.
- 31 -
SECTION 3: SOFTWARE INSTALLATION
11. Select whether or not you want to run the program now. Click Finish to complete the installation.
12. An icon for the Job Manager will be automatically added to your Desktop. You are now ready to
use the Job Manager.
- 32 -
SECTION 3: SOFTWARE INSTALLATION
Windows 8/10: Ethernet Installation
Set Up TCP/IP Address in the Computer
Go to your Network and Sharing Center in your computer’s Control Panel.
1. Click Change Adapter Settings.
2. Right click Local Area Connection, then click Properties.
- 33 -
SECTION 3: SOFTWARE INSTALLATION
3. Select Internet Protocol Version 4 (TCP/IP). Make sure you do not select Version 6. Then click
Properties.
4. Select Use the following IP Address. Type in the following IP Address: 192.168.3.3.
This number is not an error; the last digit of the IP address in this window must be dierent
than the IP address you set in the laser.
5. Type in a Subnet Mask of 255.255.255.0, then click OK.
- 34 -
SECTION 3: SOFTWARE INSTALLATION
Windows 8/10: USB Installation
To prepare your computer for USB installation, the IP Address under your Internet Protocol properties
should be set to “Obtain an IP address automatically.”
The IP Address on your machine should also match the IP Address on the Job Manager. For more
information, see “USB Connection” on page 17.
Troubleshooting the Job Manager
If you were unable to install the Job Manager, it’s possible that your Anti-Virus soware is blocking
installation. To disable Symantec Anti-Virus soware, choose Options. Other anti-virus packages should
have something similar to Symantec.
- 35 -
SECTION 3: SOFTWARE INSTALLATION
Disable all Virus and Spyware Protection Features. Aer the Job Manager has been installed go back
into your Anti-Virus soware and re-enable the setting that was disabled.
Important Job Manager Notes
• Warning: Before activating your laser, install the newest version of the Soware Suite to
properly associate the correct machine with the Job Manager.
• We suggest a minimum of 1 GB of free RAM space when managing very large engraving and vector
jobs.
- 36 -
SECTION 3: SOFTWARE INSTALLATION